$0 service call with completed repairCall (248) 800-2644

Garage door repair in Troy, Michigan

Cable & Roller Repair

One side hangs lower, a cable is off the drum, or the door shakes and binds.

Repair first. Replace only when it makes sense.

A clear diagnosis before the work begins.

Cables and rollers work together to keep a heavy door level and inside its tracks. I identify the failed part, correct the underlying tension or alignment problem, replace worn hardware, and verify smooth travel through the full opening.

You will know what failed, what the repair includes, and the price before I begin. Most common repairs can be completed during the visit when the required parts are available.

What the symptoms can mean

Catch the problem before more parts are damaged.

A garage door is one connected lifting system. The visible symptom is often only the first clue.

Warning signs

  • A cable is loose, frayed, or no longer seated on the drum
  • One bottom corner rises before the other
  • The door scrapes a track or hangs at an angle
  • You see loose cable near the floor or torsion shaft

Common causes

  • Cable corrosion, fraying, or fatigue near the bottom bracket
  • A broken spring or loss of tension allowed the cable to unwrap
  • The door hit an obstruction and changed the cable tension from side to side

How I approach the repair

Diagnose. Correct. Test.

The goal is not only to make the door move again. It is to restore controlled, balanced operation and reduce the chance of the same failure returning.

  1. 01

    Control the door weight

    I secure the door before touching a cable because the bottom fixtures and drums can be under significant force.

  2. 02

    Inspect both sides

    Both cables, drums, bottom brackets, rollers, and tracks are checked so a second developing failure is not missed.

  3. 03

    Set equal tension

    The lifting cables are routed and tensioned evenly, then the door is balanced and cycled through the tracks.

Questions homeowners ask

Cable & Roller Repair FAQ

Why did only one cable come loose?

An obstruction, uneven track, failing roller, spring problem, or worn cable can change tension on one side first. The cause matters as much as putting the cable back.

Can a frayed cable wait?

A cable with broken strands has already lost strength. Because cable failure can make the door drop or go crooked, it should be inspected before continued use.

Do not keep forcing a damaged door.

Let Ethan take a look first.

Call now